Home Categories Send inquiry

ZN1200S Paver Block Making Machine

1)The Zenith block making machine adopts frequency conversion control to reduce the starting current of the motor. This achieves the synchronous operating of vibration assembly and solves the inertia problem motor when stopping, saving power by 20%-30%. 2)With the adoption of Germany Siemens PLC and Siemens touch screen control, the operation is easy, the overall fault is low and operating data can be saved permanently. 3)The hydraulic system is controlled by proportional valve to automatically adjust the flow during production, improving the operating stability and prolonging the service life of the cylinder. 4)The feeding car adopts 360˚ rotary feeding method with fast speed and uniform distribution, applicable to various raw materials and moulds.
  1. 5)After a cabonitriding treatment, the mould is resistant to wear and has a service life of over 50% longer than general moulds.6)The machine is equipped with real-time fault diagnosis and alarming system. 7)The vibration table is connected with the workbench and the hole spacing of the eccentric shaft is enlarged, reducing the loss of energy transfer, enlarging the effictive vibration area and improving the vibration efficiency.
Pallet Size 1,200*1,150mm
Forming Area 1,100*1,080mm
Height of Finished Products 50-300mm
Cycle Time 15-25s(as per mould)
Vibration Force 120KN
Bottom Vibration 2*15KW(SIEMENS)
Top Vibration 2*0.55KW
Power 70.35KW
Total Weight Main Machine:14.98TWith facemix device: 18.49T

Block Type

Dimension (mm)



Production Capacity

(Per 8hs)

Hollow Block


12 14,400-16,800 pcs

Rectangular Paver







35,200-38,400 pcs




4,400-5,600 pcs

ZN1200S Paver Block Making Machine Related Video: